Tired of being held back by the Electronic Stability
Program in your Charger, Magnum, or 300C?
Stock RT (non-SRT8) models have an ESP disable button
on the dash - but when pressed, the ESP will only turn partially off.
Install the "No ESP" module in less than 20
mins. and you'll unleash all the tire-shredding potential these vehicles have
to offer!
No holes to drill, no switches to install, no long
wires to run. Connects to four wires located behind the radio and shifter
bezels.
By simply pressing the factory ESP button for 5
seconds, the NOESP module goes into action, totally disabling ESP until the
next time you start your vehicle.
This results in an ESP button that works like the
tri-mode version the SRTs and Police models have.
The module consists of a 1.5" x 1.5" PCboard
with a microcontroller circuit, which monitors the ESP button activity. The
module only acts to disable the ESP fully if the button is pressed and held for
more than 5 seconds.
Only $50USD (incl. shipping - ANYWHERE in the WORLD!)
Click the "Pay Pal" Buy Now button below to
order yours today!
Please indicate in the paypal "comments"
text box which forum you came from, and your forum name. This product is
intended for sale to fellow forum users, although all are welcome.
The Cadillac of all LX Fan Mods!
For all LX vehicle owners that run ANY non-stock thermostat, this mod is for you. Works in conjunction with Diablo Predator.
Simple to install, plugs directly into the Integrated Power Module fan relay sockets. Installs and uninstalls in minutes.
Triggered from various source options, either parking lights, fog lights, dedicated switch, etc. Standard installation uses parking lights.
Modes of operation: selected by multiple triggers (ie turn parking lights on/off 3 times rapidly):
3 - Manual LOW - both fans on low
4 - Manual HIGH - both fans on high
5 - Automatic - uses coolant temperature sensor to determine when the fans need to be on Low or High. Perfect for everyday use.
6 - OFF mode - fans return to factory stock, get turned on by PCM at normal temperatures. Good for flashing off contaminents, and when bringing car in for service.
8 - Set Base Temperature - allows any thermostat base temperature to be set/stored at any time. You set the thermostat temperature, Coolit will use this temperature plus a fixed offset to trigger fans on LOW. Offsets from Base temperature for Low, High and hysteresis are factory-set. This function is great for those that don't use a 180 degree stat, those who change the stat on race day or seasonally, or even those who use the factory stat, but want to run a few degrees cooler. Base temperature is set at 183 at factory for those who choose not to use this function to re-set it. This factory set up is optimized for the most common Motorad 4128 180 degree thermostat.
10 - Restore Defaults - Base temperature is set back to factory default vale, optimized for Motorad 4128
Fans turn off when car is turned off. Alternate wiring allows fans to operate when engine off.
Visual confirmation of mode changes - LED on Coolit board, and optional LED can be installed in cabin.
Optional LEDs can be installed in the cabin to indicate when Coolit is turning the fans on Low/High.
Audible confirmation of mode changes - Coolit wires to horn relay, providing "bips" that can be counted to verify mode changes.
Does not set any codes. PCM still can control fans, too
Remembers and boots in Auto or OFF modes, whichever it was in when car was last turned off.
Only $150USD (incl. shipping - ANYWHERE in the WORLD!)
Click the "Pay Pal" Buy Now button below to
order yours today! You can pay with credit card through Paypal even if you don't have a Paypal account.
Questions? Comments? Requests? Email us at BurnRubber@NoESP.com
noesp.com is a proud supporting vendor
of chargerforumz.com, 300cforumz.com, chargerforums.com and lxforums.com
Legal
Disclaimer: These products are intended as do-it-yourself-at-your-own-risk kits.
NoESP does not endorse unsafe driving habits, reckless driving, tampering with vehicle safety
systems, etc. Use at your own risk. Follow the directions carefully. If in
doubt, ask. Email us at BurnRubber@NoESP.com.